Saf-holland XL-FW10062UM Electronic Lock Indicator System (ELI Manuel d'utilisateur télécharger pdf (Page 8)

XL-FW10062UM-en-US Rev A · 2011-12-01 · Amendments and errors reserved. © SAF-HOLLAND, Inc.

Operation Instructions

Ready to Couple Proper Couple Improper Couple

Perform visual inspection See below for Error

Code Descriptions***

ERROR

CODE

INSTRUCTIONS TO DRIVER INSTRUCTIONS TO TECHNICIAN

Improper couple. Review coupling

procedures and repeat coupling attempt.*

Error appears on tractor startup. ELI senses

that the locks are closed, but does not

sense a kingpin.*

Check kingpin sensor and/or lock sensor

and fifth wheel throat. Kingpin sensor

may be bad, or too far from the kingpin.

Lock sensor may be sensing something

other than the lock. Check for presence

of metal near the lock sensor.**

Error appears on tractor startup. ELI

senses the kingpin, but does not sense

that the locks are closed.*

Check lock sensor and/or kingpin sensor

and fifth wheel throat. Locks may not

be engaging properly, or are out of

adjustment. Kingpin sensor may be

sensing something else. Lock sensor

may not be sensing properly.**

Error appears after two or more coupling

attempts. ELI did not sense the kingpin

before the locks closed.*

Check the kingpin sensor and check

for improper couple.**

Error appears after two or more coupling

attempts. ELI sensed the kingpin come in,

but lost the kingpin when the locks closed.*

Check the kingpin sensor and check

for presence of the kingpin.**

ELI sensed the kingpin, but did not sense the

locks closing within one (1) second of the kingpin

engaging the locks. Service fifth wheel.*

Check the lock sensor and check for

binding in the lock mechanism.**

ELI senses that the kingpin has been

missing for more than five seconds.

Check kingpin position.*

Check the kingpin sensor and check

for presence of the kingpin.**

ELI senses that the lock is open and the

kingpin is still present. This appears when

the handle is pulled as part of a normal

uncoupling procedure.*

Check the lock sensor. The handle is pulled

as part of normal uncoupling procedure.**

Error appears on tractor startup. ELI

senses a proper couple, but remembers

it wasn’t properly coupled the last time

it was shut down.*

Check the kingpin and/or the lock sensor.

Check for binding in the lock mechanism.**

8. Stand-Alone On-Dash Mount Electronic Lock Indicator Display

Error Code Diagnostics

* If the fifth wheel is properly coupled and an error code still appears, contact a technician.

** If the ﬁfth wheel is properly coupled and an error code still appears, consult Holland publication XL-FW10063TS-en-US, “ELI Troubleshooting Guide.”

*** To request the ELI date download software, contact SAF-Holland Customer Service at 888-396-6501.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Saf-holland XL-FW10062UM Electronic Lock Indicator System (ELI Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Saf-holland XL-FW10062UM Electronic Lock Indicator System (ELI