Saf-holland XL-AS11011OM CBX40/CB-4000 Slider Suspension Syste Manuel d'utilisateur télécharger pdf (Page 6)

XL-AS11011OM-en-US Rev F · 2014-06-13 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,

and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

Decal Requirements



SwingAlign

™

Axle Alignment Decal: XL-AR372-01 (Figure 4).



Torque Decal: XL-AR418-01 (Figure 5).

It is the responsibility of the end user to periodically inspect

all decals and ensure that they are clean and completely legible.

If any decals are missing, loose, damaged or difficult to read,

contact SAF-HOLLAND

Customer Service at 888-396-6501

to order replacements immediately.

Figure 4

Figure 5

ALIGNMENT BOLT IS ON THE FRONT OF THE ROADSIDE FRAME BRACKET:

XL-AR372-01

STEP 1. Before aligning axle, pull trailer forward in a straight line for a sufficient distance to insure there are no binds

in the suspension and then lock the brakes so the slider lock pins rest against the rear of the body rail holes.

STEP 2. Check to verify trailer is empty and emergency brakes are NOT engaged.

STEP 3. Rotate bolt CLOCKWISE to move axle forward (A arrows); COUNTERCLOCKWISE to move axle rearward (B arrows).

A = axle forward

B = axle rearward

ALIGNMENT BOLT HEAD

NOTE:

1/2 turn of

free play in either

direction (A or B)

is acceptable.

SWINGALIGN

™

NON-WELDED AXLE ALIGNMENT PROCEDURES

www.safholland.us

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Pas de commentaire

Saf-holland XL-AS11011OM CBX40/CB-4000 Slider Suspension Syste Manuel d'utilisateur Page 6