Saf-holland XL-FW10055UM FW16 Low Lube Series Fifth Wheels Manuel d'utilisateur télécharger pdf (Page 19)

Maintenance Procedures

English

XL-FW10055UM-en-US Rev D · 2014-01-29 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,

and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

3. To lock fifth wheel, rotate handle on

lock tester clockwise until the locks

close around the kingpin (Figure 36).

4. Slide the lock tester forward and

backward in the closed lock to check

for play between lock and kingpin.

Ensure that the tool remains flat with

full contact on the fifth wheel top plate.

Use pin gage to measure free play. If

free play exceeds 0.080" (2.03 mm).

adjust lock mechanism (Figure 37).

5. To adjust lock, remove the low head

socket cap screw. Rotate adjusting pin

counter-clockwise (left hand release), or

clockwise (right hand release), until the

next notch lines up with the low head

socket cap screw tapped hole. Replace

the low head socket cap screw. Adjust

only one notch at a time (Figure 38).

6. Verify the proper adjustment by locking

and unlocking fifth wheel several times

with lock tester. Check that fifth wheel

is properly locked (Figure 39).

NOTE: To unlock fifth wheel, push

down on lock tester, and rotate

“J” hook under the fifth wheel,

then pull handle back.

Figure 36

Figure 39

Figure 37

LOCK NOTCH

BEHIND RIB

LOCK COMPLETELY

CLOSED AROUND

KINGPIN

Figure 38

LEFT HAND RIGHT HAND

FIRST NOTCH

LOW HEAD

SOCKET

CAP SCREW

LOW HEAD

SOCKET

CAP SCREW

FIRST NOTCH

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Saf-holland XL-FW10055UM FW16 Low Lube Series Fifth Wheels Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Saf-holland XL-FW10055UM FW16 Low Lube Series Fifth Wheels