Saf-holland XL-FW10054UM FWS1 and FWS2 Series Fifth Wheels Manuel d'utilisateur télécharger pdf (Page 10)

XL-FW10054UM-en-US Rev B · 2012-03-09 · Amendments and errors reserved. © SAF-HOLLAND, Inc.

Figure 12

Figure 14

Figure 13

Operation Instructions

6. Lower landing gear until pads just

touch the ground (Figure 12).

NOTE: Follow instructions published

by manufacturer for proper

operation of landing gear and

ability to transfer trailer weight

off fifth wheel. DO NOT raise

trailer off the fifth wheel.

7. Disconnect brake lines and light cord.

8. Lift release handle up, pull all the way

out, and up again to hook on casting

(Figure 13). If air release equipped,

actuate fifth wheel control valve to

open locks.

9. Release tractor brakes and slowly drive

away from trailer.

8. Positioning Sliding

Fifth Wheels

1. Position tractor and trailer in a straight

line on level ground.

2. Lock trailer brakes.

Failure to stop and properly

lock the trailer brakes may

cause uncontrolled sliding

of fifth wheel which, if

not avoided, may result

in component damage to

tractor or trailer.

3. Release slide locking plungers by

moving cab switch to unlock position

(Figure 14). (If manual slide release

equipped, pull release lever.) If plungers

do not come out, lower the landing

gear to relieve pressure on the fifth

wheel. This will allow fifth wheel to

slide easier.

4. Slowly drive the tractor forward or

backward to position fifth wheel and

stop tractor at desired position.

-08&3-"/%*/((&"3

"*301&3"5&%

.07&$"#48*5$)50

6/-0$,104*5*0/

NOTE: Cab switch style may differ by

OEM design.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Saf-holland XL-FW10054UM FWS1 and FWS2 Series Fifth Wheels Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Saf-holland XL-FW10054UM FWS1 and FWS2 Series Fifth Wheels