Saf-holland XL-FW484 FW33 and XA-331 LowLube Series Fifth Whee Manuel d'utilisateur télécharger pdf (Page 9)

XL-FW484 Rev E SAF-HOLLAND, Inc. 9

OPERATING INSTRUCTIONS

Fifth Wheel Inspections

Failure to properly install, operate, or maintain this fifth

wheel may result in tractor and trailer separation which, if

not avoided, could result in death or serious injury.

1. Inspect the fifth wheel and mounting.

• Confirm that the lube plates

are in place and firmly attached.

• Tighten loose fasteners.

• Replace missing fasteners.

• Repair/replace missing,

cracked or otherwise

damaged components.

• For sliding fifth wheels, make sure both plungers

are fully engaged (see Page 14).

2. Make sure the lock is open. To open the lock, pull the release handle all the way

out. If Air Release equipped, set tractor brakes and actuate the fifth wheel control

valve to open the locks.

3. Inspect the lock jaws. If they appear dry,

apply grease to lock jaws and front of throat

directly or through the lube tube grease

fitting. Coupled lock jaws and front of throat

can be lubricated through lube tube grease

fitting (see page 15).

4. Tilt the ramps down.

If locks are closed,

pull release

handle all the

way out.

Locks are closed

and the fifth

wheel is locked.

DO NOT

attempt to

couple!

The locks are

open and ready

to couple.

TILT

DOWNWARD

Grease

fitting

location

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Saf-holland XL-FW484 FW33 and XA-331 LowLube Series Fifth Whee Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Saf-holland XL-FW484 FW33 and XA-331 LowLube Series Fifth Whee