Saf-holland XL-FW484 FW33 and XA-331 LowLube Series Fifth Whee Manuel d'utilisateur télécharger pdf (Page 14)

14 SAF-HOLLAND, Inc. XL-FW484 Rev E

OPERATING INSTRUCTIONS

continued

Fifth Wheel Slide Adjustment

1. Position tractor and trailer in a straight line on level ground.

2. Lock the trailer brakes.

The trailer must be stopped and the trailer brakes

locked to prevent damage to the tractor or trailer

by uncontrolled sliding of the fifth wheel.

3. Release slide locking plungers.

4. Move cab switch to unlock position.

5. Slowly drive the tractor forward or backward to position

the fifth wheel.

6. Re-engage the slide locking plungers. Verify that plungers

have engaged by performing a tug test.

NOTE: Retract landing gear if lowered.

7. Do a pull test to make sure plungers

are properly engaged and locked into

the slide base.

Do not operate the vehicle if the plungers are not fully engaged (locked).

Failure to properly engage plungers and slide base may cause loss of vehicle

control which, if not avoided, could result in death or serious injury.

➠

PULL FORWARD WITH TRACTOR

PULL TEST

TRAILER

BRAKES

LOCKED

VALVE S/A, AIR CONTROL

XB-01963

Move cab switch

to lock position.

AIR OPERATED

VALVE S/A, AIR CONTROL

XB-01963

Move cab switch

to unlock position.

AIR OPERATED

NOTE:

Switch style may differ

by OEM design.

NOTE:

Switch style may differ

by OEM design.

LOCKED

(ENGAGED)

RACK

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Saf-holland XL-FW484 FW33 and XA-331 LowLube Series Fifth Whee Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Saf-holland XL-FW484 FW33 and XA-331 LowLube Series Fifth Whee