Saf-holland XL-LG305 Mark V Landing Gear Manuel d'utilisateur télécharger pdf (Page 3)

UNCOUPLING INSTRUCTIONS

STEP 1

Position the

tractor and

trailer on

level ground,

clear of

persons and

obstacles.

STEP 2

➊ Set trailer brakes.

Slowly back tractor tightly against trailer.

➋ Set tractor brakes.

➌ Chock trailer wheels.

➋

➌

➊

STEP 3

Shift landing gear

to high speed and

engage crank

handle.

HANDLE

DISENGAGED

ANDLE

NGAGED

STEP 5

Switch to low gear

and crank an

additional 4-8 turns.

Secure crank handle.

STEP 4

Extend landing gear

until pads just touch

the ground.

SE HIGH GEAR

NTIL PADS TOUCH

ROUND.

SECURE HANDLE

USE

LOW

GEAR

STEP 6

• Pull fifth wheel release handle.

• Disconnect air lines and light cord.

• Release tractor brakes and slowly drive away

from trailer.

MAINTENANCE PROCEDURES

LUBRICA

TION

Lubrication should be performed at least every six months and more frequently in applications where

the landing gear are exposed to excessive moisture, waterspray, dust, or if they are not used for

extended periods. Lubricate with the trailer securely coupled to a tractor (see coupling instructions).

Employ a lubricant compatible with the original type of grease used:

Standard = Lithium base EP-2

Low Temperatur

e = Lubriplate aero-grade

1. Fully retr

act the landing gear, then using high

gear extend 2-3 turns.

2. Lubricate through the grease fittings as shown.

3. Extend and retr

act the landing gear to apply

grease to the entire length of the screw.

BEVEL GEARS

(maintain 1 lb.)

LIFT SCREWS

(maintain 1/2 lb.)

GEARBOX

(maintain 1 lb.)

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Saf-holland XL-LG305 Mark V Landing Gear Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Saf-holland XL-LG305 Mark V Landing Gear