Saf-holland XL-FW503 FleetMaster LowLube Series Fifth Wheels w Manuel d'utilisateur télécharger pdf (Page 14)

1. Position tractor and trailer in a straight line on level ground.

2. Lock the trailer brakes.

The trailer must be stopped and the trailer brakes

locked to prevent damage to the tractor or trailer

by uncontrolled sliding of the fifth wheel.

3. Release slide locking

plungers.

Visually check that both

plungers are fully extended,

as shown in Figure 4A.

NOTE: If the plungers do not

elease, using low gear on the

landing gear, raise the trailer

to relieve pressure on the

plungers. This will allow the

fifth wheel to slide easier.

5. Slowly drive the tractor forward or backward to position

the fifth wheel.

6. Re-engage the slide

locking plungers.

Verify that both

plungers have fully

engaged.

NOTE: Retract landing

gear if lowered.

UNLOCK LOCK

14 XL-FW503 Rev B

OPERATING INSTRUCTIONS

continued

Do not operate the vehicle if the plungers are not fully

engaged and landing gear fully retracted, as damage

to the tractor

, trailer and landing gear may occur.

FIGURE 4A

FIGURE 4B

Trip the release lever by tapping

it downward as shown and

allowing it to spring back.

Move cab switch

to lock position.

AIR OPERATED MANUAL SLIDE

AIR OPERATED

MANUAL SLIDE

Move cab switch

to unlock position.

Pull release lever

lift up and hook in place.

Fifth Wheel Slide Adjustment

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Saf-holland XL-FW503 FleetMaster LowLube Series Fifth Wheels w Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Saf-holland XL-FW503 FleetMaster LowLube Series Fifth Wheels w