Saf-holland XL-FW10049OM AL Aluminum NoLube Series Fifth Wheel Manuel d'utilisateur télécharger pdf (Page 5)

5

XL-FW10049OM-en-US Rev A 11-10 Amendments and Errors Reserved. © SAF-HOLLAND, Inc.

Operation Instructions

3. Fifth Wheel Intended Use

1. For pulling trailers with standard SAE

kingpins which are in good condition

and securely mounted or locked in

position in the trailer.

2. To transport loads that are within the

maximum fifth wheel rated capacities:

55,000 lbs. Maximum Vertical Load

150,000 lbs. Maximum Drawbar Pull.

3. In on-road applications.

4. As recommended in SAF-HOLLAND

literature available on the Internet at

www.safholland.us.

4. Fifth Wheel NON-Intended

Use

1. Use with non-SAE kingpins, such as

kingpins which are bent, improper size

or dimensions, not secured to maintain

SAE configuration, or which are

installed in warped trailer bolster

plates, or upper coupler and fifth

wheel lube plates that do not

maintain the SAE kingpin dimensions.

Refer to SAF-HOLLAND Service

Bulletin XL-SB004-01(available on the

Internet at www.safholland.us) for

more information on fifth wheel lube

plates.

IMPORTANT

: SAF-HOLLAND definition

of off-road refers to terrain

on which a tractor-trailer

operates which is unpaved

and rough, or ungraded. Any

terrain not considered part of

the public highway system

falls under this heading.

Failure to couple with a

proper kingpin may

result in improper

coupling, allowing

tractor and trailer

separation, which if

not avoided, could

result in death or

serious injury.

2. Tow-away operations which

damage or interfere with the

proper operation of the fifth

wheel.

3. The attachment of lifting devices.

4. The transport of loads in excess

of rated capacity.

5. In off-road applications.

6. Applications other than

recommended in SAF-HOLLAND

literature available on the

Internet at www.safholland.us.

5. Coupling Preparation

1. Prior to coupling you must

inspect the fifth wheel and

mounting.

• Confirm that lube plates are in

place and firmly fastened.

• Tighten loose fasteners.

• Replace missing fasteners.

• Repair/replace missing,

cracked or otherwise

damaged components.

• If you have a sliding fifth

wheel, make sure both

plungers are fully engaged.

• Inspect air line connections.

1 2 3 4 5 6 7 8 9 10 ... 23 24

Commentaires sur ces manuels

Pas de commentaire