Saf-holland XL-LG315-01 Formula 150 Landing Gear (Manufactured Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Saf-holland XL-LG315-01 Formula 150 Landing Gear (Manufactured. SAF-HOLLAND XL-LG315-01 Formula 150 Landing Gear (Manufactured after March 1, 2000) User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
LANDING
GEAR
Do not deviate from these instructions. Any changes or
deviations will void all warranties, expressed or implied,
unless written consent is first obtained from the factory.
OPERATION OF HOLLAND
FORMULA 150 LANDING GEAR:
NOTE: Holland Formula 150 2-speed gearbox has high
and low range gears. High range gear is to be used only
for rapid traverse up from and down to the ground and is
not intended to lift or lower any load. For additional infor-
mation, see Holland publication XL-FW302-XX, entitled
"Fifth Wheel Operating Instructions."
TO EXTEND:
On outside mounted landing gear, engage the crank with
the crankshaft and turn the crank clockwise. Inside mounted
landing gear are extended by turning the crank counter-
clockwise. Using high gear, lower the landing gear until the
pads make contact with the gr
ound. To reduce the load on
the fifth wheel, shift to low gear and crank an additional
four to eight turns. Leave the landing gear in low gear and
store the crank handle in the holder provided.
TO RETRACT:
On outside mounted landing gear
, engage crank with
crankshaft and turn the crank counterclockwise. Inside
mounted landing gear are retracted by turning the crank
clockwise. Retract the landing gear using low gear until
unloaded. Then shift to high gear and continue cranking
until fully retracted. Leave the crankshaft engaged to
prevent road vibration wind-down. Store the crank in the
holder provided.
XL-LG315-01 1
CAUTION
Always grip crank handle securely.
Always grip crank handle securely
with both hands before shifting.
Never shift landing gear
under load.
Never leave the crank unsecured.
Never raise or lower a loaded
trailer in high gear.
Formula 150 Landing Gear
(Manufactured after March 1, 2000)
OPERATING, MAINTENANCE,
AND REPAIR PROCEDURES
RETRACT
TRAILER
COUNTER CLOCKWISE
H
IGH
C
LOCKWISE
EXTEND
LOW
Before operating, identify the mounting style of your land-
ing gear — inside or outside mount (
see figures below).
Push crank handle in for
low speed.
Pull crank handle out for
high speed.
Turn crank:
Counterclockwise = extend
Clockwise = retract
TRAILER
COUNTER CLOCKWISE
LOW
CLOCKWISE
HIGH
RETRACT
EXTEND
Push crank handle in for high speed.
Pull crank handle out for
low speed.
T
ur
n crank:
Counterclockwise = retract
Clockwise = extend
OUTSIDE MOUNT
INSIDE MOUNT
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - AND REPAIR PROCEDURES

LANDINGGEARDo not deviate from these instructions. Any changes ordeviations will void all warranties, expressed or implied,unless written consent is f

Page 2

MAINTENANCE:LUBRICATION:Although Formula 150 landing gear are adequatelygreased and packed with high quality lubricants whenmanufactured, it may be ne

Page 3

SINGLE SPEED LEG ASSEMBLY PROCEDURE (continued):7. Put key (9) into slot on shaft (11). Slide gear (10) overkey (9) on shaft (11). Check for free move

Page 4 - OPTIONAL

56571314153810121192084171811191456571315OPTIONAL4648 49 504734101283298192830313552729339162623(5 req.)2524(5 req.)3435373842021192244453941364243384

Commentaires sur ces manuels

Pas de commentaire