Saf-holland XL-LG206 JS-300-J DOLLY TONGUE JACK Manuel d'utilisateur télécharger pdf

JS-300-J DOLLY TONGUE JACK

XL-LG206

APPLICATION:

Recommended for converter dollies, trailers and single jack requirements.

FEATURES:

Heavy tubular construction with top crank and steel swivel caster with shock

absorption capabilities. Other foot options available.

SPECIFICATIONS:

Static Load Capacity: 1,200 lbs.

Lift Capacity: 6,000 lbs.

Crank Turns Per Inch of Travel: 4

Travel: 15"

Wheel Size: 5" diameter

Weight: 36 lbs.

INSTALLATION:

1. Use a mounting structure of sufficient strength to support the rated capacity.

2. Use the hole pattern described on the reverse.

3. Use (4) 1/2" grade 8 fasteners, properly tightened.

4. Provide ample crank swing clearance.

OPERATING INSTRUCTIONS:

1. To Lower Jack:

Crank the leg down using the crank provided. Crank with a counter clockwise rotation until the caster is

firmly on the ground and the drawbar eye is at the desired height.

2. To Raise Jack:

Crank the leg up using the crank provided. Crank with a clockwise rotation until maximum road clear-

ance has been obtained.

CAUTION: When raising the jack, be sure the tow bar eye is properly supported.

MAINTENANCE:

For proper performance, the following maintenance steps should be performed every 3 months or sooner

under severe conditions.

1. Clean and check for proper operation. Inspect for worn, damaged or missing parts. Replace as required

using only Holland parts.

2. Lubricate the inner and outer leg by applying grease through the two grease fittings in the outer leg and

one grease fitting on the inner leg. Lubricate the caster axle with a light oil.

3. Check mounting fasteners for proper torque.

GENERAL INFORMATION:

1. Do not modify or add to the product.

2. Wear safety goggles during installation and removal.

3. Never strike any part of the item with a steel hammer.

4. Do not weld on this product without written consent from the factory.

WARNING: THIS EQUIPMENT MUST NOT BE USED OR MAINTAINED IN A CARELESS MANNER.

This product is covered by Holland’s Commercial Products Warranty. Holland reserves the right, without giv-

ing prior notice, to change specifications and dimensions as designs are altered or improved.

1 2

JS-300-J DOLLY TONGUE JACK 1

Résumé du contenu

Page 1 - JS-300-J DOLLY TONGUE JACK

JS-300-J DOLLY TONGUE JACKXL-LG206APPLICATION:Recommended for converter dollies, trailers and single jack requirements.FEATURES:Heavy tubular construc

Page 2

XB-V-348 (2 REQ.)XA-V-346 (4 REQ.)XB-248-A (2 REQ.)XA-V-349XB-1108 (2 REQ.)XB-338 (2 REQ.)XA-V-315XA-V-3193.41"1.70".50"5.25".53&q

Commentaires sur ces manuels

Pas de commentaire

Saf-holland XL-LG206 JS-300-J DOLLY TONGUE JACK Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Saf-holland XL-LG206 JS-300-J DOLLY TONGUE JACK. SAF-HOLLAND XL-LG206 JS-300-J DOLLY TONGUE JACK User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Saf-holland XL-LG206 JS-300-J DOLLY TONGUE JACK