Saf-holland XL-FW376-01 Electronic Lock Indicator For XA-351 a Manuel d'utilisateur télécharger pdf

FIFTH

WHEELS

1. Sensors are installed on the fifth wheel at Holland

Hitch Company: Remove the existing Holland fifth

wheel and replace with the Electronic Lock

Indicator-equipped fifth wheel.

2. Install the display box in the cab: Mount the

display box in an area of the cab that is easily

visible and accessible to the driver. Clean

the display box mounting surfaces with

isopropyl alcohol and allow to air dry. Use the

adhesive-backed reclosable fastener provided to

attach the display box to an appropriate surface.

Route the cable coming from the display box

inside the cab where the socket end of the 25´

foot cable will be located.

3. Install the corrugated loom

around the 25´extension cable.

4. Cut one slit into the

grommet. (See FIGURE 2.)

5. Wrap the grommet around the

25´ extension cable in the approximate location

where it will enter the cab. (See FIGURE 3.)

O THE DISTANCE.

XL-FW376-01

WARNING

The electronic lock indicator is a tractor/trailer fifth wheel coupling aid and is intended

as an additional safety check to assure the driver of a safe and complete coupling.

It does not eliminate the requirement for a visual inspection of the fifth wheel.

ALWAYS GET OUT OF THE TRACTOR CAB AND VISUALLY INSPECT THE FIFTH WHEEL COUPLING!

Electronic Lock Indicator*

For XA-351 and XA-331 Series

Fifth Wheel Top Plates with

Holland factory-installed sensors

12- and 24-volt system

INSTALLATION

INSTRUCTIONS

INSTALLATION PROCEDURES

Dash Mount

25´ EXTENSION CABLE

GROMMET CORRUGATED

LOOM

RED (+)

BLACK (-)

SENSOR HARNESS

(Attached to the

underside of the

fifth wheel)

DASH MOUNT DISPLAY BOX

RECLOSABLE

FASTENER

THE ELI

SYSTEM

FIGURE 2

FIGURE 3

EXTENSION CABLE

(INSIDE LOOM)

CORRUGATED

LOOM

GROMMET

* U.S. Patent #5861802, D442971, 6285278,

and other patents pending.

FIGURE 1

POWER

WIRES

1 2

INSTALLATION 1
INSTRUCTIONS 1

Résumé du contenu

Page 1 - INSTRUCTIONS

FIFTHWHEELS11. Sensors are installed on the fifth wheel at HollandHitch Company: Remove the existing Holland fifthwheel and replace with the Electroni

Page 2

2INSTALLATION PROCEDURES continued6. Drill a 13/16˝ diameter utility hole in the cab making sure that there are no obstructionsnear the drilling area.

Commentaires sur ces manuels

Pas de commentaire

Saf-holland XL-FW376-01 Electronic Lock Indicator For XA-351 a Manuel d'utilisateur

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Saf-holland XL-FW376-01 Electronic Lock Indicator For XA-351 a